Merak Ettikleriniz

Sıkça Sorulan Sorular

  1. Caliber for rifled-set guns and the bullets used in these guns; Just like centimeter, millimeter is a unit of measurement and corresponds to one hundredth of 1 inch. So 1 caliber is 0.01 inch. In hunting rifles, Caliber (Gauge (Ga) or number) is the number of spheres of equal size, which corresponds to 453.6 grams of lead (Pb) with a density of 11.43 g/cm³ at 15°C. This number represents the nominal size of the barrel and the diameter of each of the spheres is equal to the inside diameter of the barrel in the mentioned caliber. 1 inch is 2.54 centimeters, or 25.4 millimeters, in the metric system. However, caliber refers to the diameter and length of the bullet that the gun can fire, as well as the barrel diameter of the gun itself, rather than a unit of measurement when it comes to guns. Therefore, when we talk about the calibers of guns and bullets, we mostly do not talk about the unit of measurement that we tried to explain above, because metric measures such as 9 millimeters and 10 millimeters are also used to express the calibers of guns and bullets. From this perspective, caliber is actually a term used to refer to the diameters of firearms and bullets. Commonly Used Calibers .22 .224 / 5.56mm. .260 / 6.5mm. .284 / 7mm. 30 / 7.62mm 9mm .38 / .357 .40 / 10mm. .45 .50
  2. The procedures to be followed in obtaining a gun license in our country are implemented within the framework of the "Law on Firearms and Knives and Other Tools" no. 6136 and the "Regulation on the Implementation of the Law on Firearms and Knives and Other Tools" no. 91/1779. So, how to get a gun license, what documents are needed? First of all, there are different types of licenses for different types of firearms. These are the types of licenses obtained for pistols that are classified as rifled weapons and shotguns that fall into the category of smoothbore weapons. Although the nature of these licenses is different, the procedures applied during the license acquisition are very close to each other. In order to apply for a gun license, it is necessary to be a citizen of the Republic of Turkey, to be over the age of 21 and to meet the conditions in the above-mentioned regulation. What documents are required for a gun license? Competent authorities may be district police directorates or gendarmerie commands, depending on their residence address. During the application, a) The petition you will write to the relevant authority, b) One half cover cardboard file, c) The original of your identity card, d) Medical board report stating that there is no objection to obtaining a gun license, e) 4 color passport photos of yours, f) You must have an up-to-date document (signed, sealed, dated and certified) with you, which you will receive from the tax offices, showing that there is no overdue tax debt in excess of 2000 TL. After the application, if the investigation to be carried out by the relevant authority is positive, you can get your gun purchase certificate with the approval of the governorship. You have to complete your arms purchases with this document from the MKEK institution. For Shotgun License: During the application, a) The petition you will write to the relevant authority, b) Half cover cardboard file, c) The original of your identity card, d) Medical board report stating that there is no objection to obtaining a gun license, e) You must have 4 colored passport photos with you. Remember! The Shotgun License only authorizes you to carry and hold. In order to hunt, you must apply to the Regional Directorate of Forestry and get a "Hunting Card". You cannot hunt with a Proof of Purchase; In order to carry your rifle freely, you must register it with your license.
  3. Tetra, which is open to innovations and development, always prioritizes safety thanks to its expert experience and accident-free shooting vision. It always offers a reliable use to its users by putting all rifles produced from primary quality materials to safety tests in accordance with the necessary procedures.
  4. Pour gun oil into the small brush supplied with the gun, move the brush back and forth in the barrel a few times. Dry the inside of the barrel with the original and clean cloth supplied with the gun. Repeat this process until the cloth comes out clean from the barrel. Clean the slides with a cloth oiled with cleaning oil, if necessary, use the brush supplied with the gun. After lightly lubricating the inside and outside of the barrel, run a clean cotton cloth soaked in gun oil over the barrel from one end to the other and lightly oil the slides.
CANSAN MAKİNA OSMAN CANDAN | TETRA
Tüm hakları saklıdır © 2022 TETRA
Tasarım & Yazılım POST AJANS